20Mhz-clock-phase-lock

The 20-MHz clock phase-locks to Apple`s Mac II 10-MHz NuBus clock. It uses a simple, inexpensive CMOS circuitry to generate 10-and 20-MHz square waves. The output duty cycle settings are insensitive to Vee variations. The input to the circuit is a NuBus clock signal with specifications that call for a 75 percent duty cycle at 10 MHz-a square wave that`s high for 75 ns and low for the remaining 25 ns.To generate the 20-MHz signal, the circuit produces a 25-ns negative-going pulse, delayed 50 ns from the falling edge of the 10-MHz NuBus clock input at point E. NO Ring that pulse with the NuBus clock produces the 20-MHz clock at point G. Finally, applying the 25-ns pulse to the set input of a set-reset input, results in a 10-MHz square wave at F.

Reprinted Url Of This Article:
http://www.next.gr/meter-counter/clock-circuits/20mhz-clock-phase-lock-l13214.html