Position: Index >

Proximity alarm

2016-02-19 22:50  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


Inverters Ula and Ulb are connected in a simple RC oscillator circuit. The frequency is determined by the values of Rl, Cl, C2; and the internal characteristics of the integrated circuit. As long as the circuit is oscillating, a positive dc voltage is developed at the output of the voltage-coupler circuit: C3, Dl, D2 and C4. The dc voltage is applied to the input of Ulca€”the third inverter amplifiera€”keeping its output in a low state, which keeps Ql turned off so that no sound is produced by BZ1. With Cl and C2 adjusted to the most sensitive point, the pickup plate will detect a hand 3 to_5-inches away and sound an alert.
Proximity alarm

Set Cl and C2 to approximately one-half of their maximum value and apply power to the circuit. The circuit should oscillate and no sound should be heard. Using a non-metallic screwdriver, carefully adjust Cl and C2, one at a time, to a lower value until the circuit just ceases oscillation: Buzzer BZ1 should sound off. Back off either Cl or C2 just a smidgen until the oscillator starts up againa€”that is the most sensitive setting of the circuit.



Reprinted Url Of This Article:
http://www.next.gr/sens-detectors/various-circuits/proximity-alarm-l12290.html