Position: Index > Amplifier Circuit >

30W Class AB amplifier

2015-01-04 08:38  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.
30W Class AB amplifier

 

30W Class AB amplifier

 


To set the above amplifier up, set R1 to max and R12 to 0. After doing this successfully, power on the amplifier. Set R1 so that the measured output offset is between 30 and 100mV. Once set, adjust R12 slowly to achieve a quiescent current of around 120mA. Keep checking the quiescent current as the amp heats up as it might change due to voltage drop changes in the output devices caused by heat. The heatsinks should be 0.6K/W or less for two amplifiers.


30W Class AB amplifier












Reprinted Url Of This Article:
http://electronics-diy.com/electronic_schematic.php?id=715