Position: Index > Amplifier Circuit >

88-108Mhz FM Preamplifier

2015-01-05 16:00  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.
88-108Mhz FM Preamplifier

 

88-108Mhz FM Preamplifier

 


This VHF amplifier working on Band 2 Radio Spectrum tuning approximately 88 - 108 Mhz The Preamplifier circuit uses two 2N3819 FET's in cascade configuration. The lower FET operates in common source mode, while the upper FET, operates in common gate, realizing full high frequency gain. The bottom FET is tunable allowing a peak for a particular station.


Coil details follow:
L1 4 turns of 18swg air spaced with a 1cm diameter, the tap is one turn up from earth end...
L2 4 turns of 18swg air spaced with 1 cm diameter. The coupling coil is 1 turn inter wound from the supply end. Enamel coated wire must be used.





Reprinted Url Of This Article:
http://electronics-diy.com/electronic_schematic.php?id=902