Position: Index > Amplifier Circuit >

Band 2 Preamplifier

2015-01-05 02:21  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.
Description
This is a VHF amplifier for the Band 2 Radio Spectrum tuning approximately 88 - 108 Mhz.



Notes
The circuit uses two 2N3819 FET's in cascode configuration. The lower FET operates in common source mode, while the upper FET, operates in common gate, realising full high frequency gain. The bottom FET is tunable allowing a peak for a particular station. Coil details follow:

L1 4 turns of 18swg air spaced with a 1cm diameter, the tap is one turn up from earth end...
L2 4 turns of 18swg air spaced with 1 cm diameter. The coupling coil is 1 turn interwound from the supply end. Enamel coated wire must be used.






Reprinted Url Of This Article:
http://www.zen22142.zen.co.uk/Circuits/rf/band2pre.htm