Position: Index > Amplifier Circuit >

Car audio amplifier using TDA2003

2015-01-03 20:04  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Car Audio Amplifier Circuit


A simple low power car stereo amplifier circuit based on TDA 2003 is shown here. The circuit uses cheap, readily available components and it is very easy to construct. TDA2003 is an integrated car radio amplifier from ST Micro electronics that has a lot of good features like short circuit protection for all pins, thermal over range low harmonic distortion, low cross over distortion etc.
In the circuit given here each TDA2003 is wired as a mono amplifier operating from a 12V supply. Resistors R2 and R3 forms a feedback network that sets the amplifiers gain. C7 is the input DC de-coupling capacitor and C5 couples the speaker to the amplifiers output. C4 is used for improving the ripple rejection while C1 and C2 are employed for power supply filtering. C3 and R1 are used for setting the upper frequency cut-off. Network comprising of C6 and R4 is used for frequency stabilization and to prevent oscillation.

Car audio amplifier Circuit diagram.

Car stereo amplifier circuit diagram

Car stereo amplifier circuit schematic


Assemble the circuit on a good quality PCB.Heat sinks are necessary for both ICs.The circuit can be operated from 12V DC.S1 is the ON/OFF switch.

Other Audio amplifier circuits in our website,that may interest you;

1. Car Stereo Amplifier Circuit – using TDA1553

2. Audio Amplifier Circuit-using TDA2040

3.6 Watt Hi Fi Audio Amplifier

4.Mosfet Audio Amplifier Circuit

5.20 Watt Audio Amplifier

Reprinted Url Of This Article: