Position: Index > Amplifier Circuit >

Car stereo amplifier circuit using TDA2040

2015-01-03 13:30  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Car Audio Amplifier Circuit:

Given below is a car stereo amplifier circuit using? audio amplifier IC – TDA2040

Description of the circuit:

A car stereo amplifier circuit using TDA2040 is shown here. TDA2040 is a monolithic integrated audio amplifier that operates in Class AB mode. The IC has built in circuitry for short circuit protection and thermal shut down and more over it can be operated from a single supply too. The amplifier can deliver 12 watts into to a 8 ohm speaker.

In the circuit the IC is wired in order to operate from the cars 12V line. Capacitor C7 is the input DC decoupling capacitor and R4 provides feedback. Network consisting of resistor R5 and capacitor C5 provides high frequency stability and prevents any chance of oscillation. Capacitor C6 couples the ICs output to the speaker. C2 and C1 are power supply filters.

Circuit diagram of car stereo circuit using TDA2040

Car audio amplifier circuit schematic and diagram

Car amplifier circuit diagram

Notes.

Quality of the PCB is a very crucial factor in the amplifiers performance.The amplifier can be operated from cars 12V line.Heat sink is necessary for TDA2040.All electrolytic capacitors must be rated 15V.Only one channel is shown here. For stereo application you must make one more identical copy.

We have more car audio amplifier circuits in our website of your interest:

1.Car Stereo Amplifier using TDA2003

2. Car Audio Amplifier using TDA1553

Check our other popular amplifier circuits:

3. 20 Watt Audio amplifier circuit

4. 2X60 Watt Audio amplifier circuit

5. HiFi Headphone Amplifier Circuit



Reprinted Url Of This Article:
http://www.circuitstoday.com/car-stereo-circuit-using-tda2040