Position: Index > Amplifier Circuit >

FET based audio preamplifier.

2015-01-03 11:34  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Description.
This is the circuit of a based audio preamplifier which has very low noise. One FET and one BJT are used in this circuit. The audio signal to be amplified is coupled to the base of FET Q1 using capacitor C1 and resistor R3.Base of transistor Q2 is coupled to the drain terminal of FET Q1. Transistor Q2 provides additional current gain. The final signal will be available at the collector of Q2.Capacitor C3 provides necessary negative feedback, which improves stability. Capacitor C2 is an output DC decoupling capacitor. Since an FET is used in the input stage this particular amplifier circuit has very high band width (10 KHz- 450 KHz) and input impedance (around 1M).

Circuit diagram.

fet-based-audio-preamplifier-circuit
Notes.

The circuit can be assembled on a vero board.Use 12V DC for powering the circuit.For optimum performance, input and output grounds must be properly decoupled.
Reprinted Url Of This Article:
http://www.circuitstoday.com/fet-based-audio-preamplifier