Position: Index > Amplifier Circuit >

Fast Amplifier Circuit diagram with DC Stabilization

2015-01-03 00:23  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


Fast Amplifier Circuit diagram with DC Stabilization
This amplifier circuit combines the LT1010 and a fast discrete stage with an LT1008 based dc stabilizing loop. A differential stage which is single-ends into the LT1010 is formed by Q1 and Q2. An output of 1 V pk-pk into a typical 75-Ω video load is delivered by the circuit. With gain = 2, the gain is considered flat up to 10MHz since it only attenuated about -0.5dB, with the -3 dB point occurring at 16 MHz. At gain = 10, this amplifier flat curve will be up to 4 MHz (0.5dB deviation), with -3 dB point at 8 MHz. The peaking adjustment should be optimized under loaded output conditions. This is a simple stage amplifier for fast applications where relatively low output swing is required. For video amplifier application, 1 V pk-pk output works nicely. A possible problem is the relatively high bias current, typically 10 μA. Additional swing is possible, but more circuitry is needed.