Position: Index > Amplifier Circuit >

High Quality Monoblock Power Amplifier

2015-01-03 17:09  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

High Quality Amplifier 300x171 High Quality Monoblock Power Amplifier

The scheme chosen for its high quality sound, great power, the relative ease of setting up a high potential for bass.

Correctly assembled amplifier is immediately reduced to setting the quiescent current setting. He put up trimmer R15. First, put up a minimum quiescent current and allow the amplifier to work for 15-20 minutes on medium power. After this input shorting switch off and expose the acoustics of a quiescent current of 50-80 mA. It measures the decline in voltage on the resistors R24 – R27, it should be in the range 0,22-0,36 V. The voltage on the right and the left arm might be slightly different.

The scheme is desirable to use film capacitors K73-17 or foreign analogues, C8, C12, C13 – can be ceramics. Weekends and proximity with transistors it is desirable to choose pairs, well, at least one of the parties, as mutually desirable to select and VT1, VT3 and VT2, VT4. In the photo resistors R1 and R2 at 0.25 W, and later they were replaced by 2W, although enough of resistors and 0.5 Watts. For transistors VT5, VT7 made a small aluminum heatsink. The dimensions of the PCB 140h80mm.


Reprinted Url Of This Article:
http://amplifiercircuit.net/high-quality-monoblock-power-amplifier.html