Position: Index > Amplifier Circuit >

Transistor Amplifier Circuit-12 Watts

2015-01-02 18:18  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

12 Watts Transistor Amplifier Circuit


The circuit shown below is not at all expensive as theamplifiercontains only an op-amp and four transistors (easily available from your electronics junk box).Here the op-amp used is uA 741 which produces the required gain.The four transistors are wired as complementary Darlington’s which produces the drive for the speaker.

The voltage drop across the resistors R2 and R3, are used as the input of the Darlington pairs . As the input current to the op-amp depends on the level of the signal op amp is amplifying the voltage drop across the resistors R2 and R3 will be proportional to the input signal.These voltage drops are given to the base of Darlington pairs. The amplification is stabilized as a result of the negative feedback from the junction of collectors of Q2 and Q4. The theory may seem little awkward for you.But its working good.Such a simple but stable circuit as this can produce a reasonable output of 12W on a 4 Ohm speaker.

Transistor Amplifier Circuit Diagram with Parts List.

Transistor Amplifier Circuit

Transistor Amplifier Circuit Diagram



    Use a well regulated and filteredpower supplyfor noise free operation.Assemble the circuit on a good quality PCB or common board.Any op amp which can be operated from a 12V dual supply can be used instead of uA 741.

    We have more Audio Circuits that you may like to take a look:

    1. Intercom Circuit

    2. Audio Level Meter

    3. 3 Watt Stereo Amplifier

    4. IR Headset

    5. How to Convert CD ROM to Audio CD Player

    Reprinted Url Of This Article: