Position: Index > Audio Circuit >

20Db-audio-booster

2016-01-09 08:05  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


The amplifier`s gain is nominally 20 dB. Its frequency response is determined primarily by the value of just a few components-primarily C1 and Rl. The values in the schematic diagram provide a response of ?±3.0 dB from about 120 to over 20,000 Hz. Actually, the frequency response is flat from about 170 to well over 20,000 Hz. it`s the low end.that deviates from a flat frequency response. The low end`s rolloff is primarily a function of capacitor C1, since R1`s resistive value is fixed. If C1`s value is changed to 0.1uF, the low end`s comer frequency-the frequency at which the low end rolloff starts-is reduced to about 70 Hz.
20Db-audio-booster

Ifyou need an even deeper low end rolloff, change C1 to a 1.0uF capacitor. If it`s an electrolytic type, make certain that it`s installed into the circuit with the correct polarity-with the positive terminal connected to Q1`s base terminal.









Reprinted Url Of This Article:
http://www.next.gr/audio/amplifiers/20db-audio-booster-l13134.html