Position: Index > Audio Circuit >

4 channel audio mixer circuit diagram using SSM2024

2014-11-26 21:19  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

A 4 channel audio mixer that requires very few electronic components can be built using this electronic scheme based on SSM2024 chip. To obtain a small offset and a high rejection, the four inputs of the 4 channel audio mixer circuit must have an impedance of 200 ohms to the ground. These impedances are resistances obtained with R5-R8, which are part of the voltage divider at each input.
With values of the components from this scheme nominal input signal is 1 V (0 dBV). At this level, distortions are about 1%, and at lower levels do not exceed 0.3%.
Maximum amplification is obtained for a control current of 500 uA, in which case the input control voltage is slightly increased to 0.5 V (result we need a maximum control voltage of 5.5 V).

KA2411 high power bicycle horn project circuit diagram LM384 2 way intercom system circuit TDA7241 20 watt car audio amplifier schematic circuit project U450B electronic buzer siren circuit diagram

The amplifier output currents are summed by simply connecting the output pins.
The signal / noise of the mixer is about 90 dB and the bandwidth of the order of 130 kHz.
SSM2024 integrative work satisfactorily with a supply voltage between 9 V and 18 V, but best results are obtained at ± 15 V.

Circuit Diagram:  4 channel audio mixer circuit diagram using SSM2024