Position: Index > Audio Circuit >

Active Audio System(TDA2052)

2016-01-10 06:17  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article introduces Active Audio System (TDA2052). The principle is very simple, very practical. The circuit components can help you understand better grasp this principle. For example, in this circuit, you can go to find and buy these components: TDA2052.

This active audio audio system use three TDA2052 chips and 5 speakers ( one woofer, two tweeters and two midranges ). For this TDA2052 active audio system we need dual 20 volts power supply and five volts supply for the stand by function.To the input of the every audio IC chip is placed an audio filter for filtering the audio signal for used speakers ( low pass for woofer , high pass for midranges and tweeters)

The subwoofer plays the 20 to 300 Hz frequency range, while the remaining 300 Hz to 20KHz are sent to two separate channels with stereo effect.If one of the amplifier is affected by clipping distortion the others amplifiers are not affected .

Figure:1 TDA2052 Active Audio System

Figure 1 TDA2052 Active Audio System

 

 


Reprinted Url Of This Article:
http://www.eeweb.com/blog/extreme_circuits/tda2052-active-audio-system