Position: Index > Audio Circuit >

LM1496 frequency doubler circuit

2014-11-13 01:53  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Using the LM1496 integrated circuit can be made a very simple frequency doubler
LM1496 can process only signals that do not exceed 25 mV: above this level, significant distortions occur, so that the scheme is provided with an input voltage divider. Thus it is possible to obtain, from an input signal of 500 mV, a signal of only 25 mV, at the LM1496's input.

Door ring circuit with memory Electronic tuning fork circuit diagram project Audio distortion level meter indicator circuit project Electronic switch for audio signals circuit diagram

To get to output a signal large enough, IC1's output signal is amplified by IC2 (operational amplifier), which is connected as a noninverting amplifier. Since the output of IC1 contains a DC component about 8 V, the coupling between the two stages will be via a capacitor C4.

For values of R15 and R16 IC2 data scheme achieves a gain equal to 16 (24 dB). General amplification of circuit depends on the input signal: if the input is 1.2 V gain is unitary, when input drops to 0.1 V, the increase will be only 0.1.

Circuit Diagram:  LM1496 frequency doubler circuit