Position: Index > Audio Circuit >

Precision Audio Millivoltmeter

2016-01-01 05:56  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Measures 10mV to 50Volt RMS in eight ranges
Simply connect to your Avo-meter set @ 50uA range

Parts:
R1 909K 1/2Watt 1% Metal Oxide Resistor
R2 90K9 1/2Watt 1% Metal Oxide Resistor
R3 9K09 1/2Watt 1% Metal Oxide Resistor
R4 1K01 1/2Watt 1% Metal Oxide Resistor
R5 100K 1/4W Resistor
R6 2M2 1/4W Resistor
R7 82K 1/4W Resistor
R8 12K 1/4W Resistor
R9 1K2 1/4W Resistor
R10 3K3 1/4W Resistor
R11 200R 1/2W Trimmer Cermet
C1 330nF 63V Polyester Capacitor
C2,C3 100uF 25V Electrolytic Capacitor
C4 220uF 25V Electrolytic Capacitor
C5 33pF 63V Polystyrene Capacitor
C6 2u2 63V Electrolytic Capacitor
D1-D4 1N4148 75V 150mA Diodes
IC1 CA3140 Op-amp
IC2 CA3130 Op-amp
SW1 2 poles 5 ways rotary switch
SW2 SPDT switch
J1 RCA audio input socket
J2,J3 4mm. output sockets
B1 9V PP3 Battery
Clip for PP3 Battery

Notes:
Connect J2 and J3 to an Avo-meter set @ 50uA range
Switching SW2 the four input ranges can be multiplied by 5
Total fsd ranges are: 10mV, 50mV, 100mV, 500mV, 1V, 5V, 10V, 50V
Set R11 to read 1V in the 1V range, with a sinewave input of 1V @ 1KHz
Compare the reading with that of another known precision Millivoltmeter or with an The oscilloscope reading must be a sinewave of 2.828V peak to peak amplitude
Frequency response is flat in the 20Hz-20KHz range
If you have difficulties in finding resistor values for R1, R2, R3 & R4, you can use the following trick:

R1 = 10M 1M in parallel
R2 = 1M 100K in parallel
R3 = 100K 10K in parallel
R4 = 1K2 6K8 in parallel
All resistors 1% tolerance


Reprinted Url Of This Article:
http://www.diy-electronic-projects.com/p16-Precision-Audio-Millivoltmeter