Position: Index > Audio Circuit >

Sinusoidal signal generator

2014-11-05 19:06  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This signal generator provides a sinusoidal output signal with a frequency of 440 Hz, at two voltage levels. Power can be made with a voltage between 1.5 V and 16 V. IC1a works as wave generator, the values of R4 and C1 determine the frequency of tipping the AO output. Potentiometer P1 allows to obtain a perfectly rectangular signal (setting can be done by listening and adjusting for low distortion signal).

Microphone amplifier circuit Duplex audio communication system circuit Color lights organ circuit diagram Electronic volume limiter circuit diagram project

Network R5-R6-C2 reduces output by 3 dB IC1a's (50%), after which half the signal is superimposed voltage.
IClb form a third order Cebasev filter with cutoff frequency of 400 Hz, which eliminates most harmonic of rectangular signal, thus resulting in an output waveform close enough of a sinusoidal.

The output signal S1 is selected with the voltage divider R9-R10-R11, depending on the needs of the test circuit. Powered by 16 V, output level is 1.5 or 30 mVef VEF, with 1.5 V supply, output levels are 150 mV and 3 mV. Output frequency range from about 440 Hz to 16 V, at about 370 Hz to 1.5 V.

Circuit Diagram:  Sinusoidal signal generator circuit diagram