Position: Index > Basic Circuit >

4 order filter with a single IC

2015-01-11 20:35  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

Filters with high orders are designed usually with 2 or more cascaded sections. This order 4 filter need only one OA IC , so we can achieve lower distorsions, lower intermodulation …
Resistors values represent the load on the OA output, the maximum TL081 load is 2kΩ . R1-R4 build a 2.5kΩ impedance and so the external load cannot be lower than 10kΩ .

The filter characteristic is a Bessel polinome. With the actual components value, at -3dB the frequency is 1kHz. You can obtain different frequencies by changing the components value.

4-th order filter circuit schematic


Reprinted Url Of This Article: