Position: Index > Basic Circuit >

High Q notch filter

2015-01-14 15:30  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

In the circuit shown, Twin-T network connections with LM102 in form of High Q notch filter.
Usually, the junction of R3 and C3 to ground, is bootstrapped to the output of the follower.
Because it has a very low impedance,neither the depth nor the frequency of the notch change.
However, Q increases in proportion to the amount of the input feedback signal to the R3 and C3,
the response of the twin-T and the response to the follower input.

Related links
Notch Filter
Twin T filter
Low noise circuit
Transistor Hum Notch Filter
RC Notch Filter (Twin T)
Twin T Notch Filter by TL082

Reprinted Url Of This Article: