Position: Index > Battery Circuit >

200mA/Hour – 12V NiCAD Battery Charger circuit diagram

2016-05-11 05:18  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

The following diagram is the schematic diagram of 12V NiCAD battery charger with charging rate of 200mA/Hour.

200mA/Hour   12V NiCAD Battery Charger circuit

This NiCAD battery charger circuit charges the battery at 75 mA until the battery is charged, then it reduces the current to a trickle rate. It will fully recharge a dead/unpowered battery in 4 hours and the battery can be left in the charger indefinitely. To set the shut off point, connect a 270 ohm / 2 Watt resistor across the charge terminals and adjust the pot for 15.5V across the resistor.



Reprinted Url Of This Article: