Position: Index > Battery Circuit >

Battery Backup Supply

2016-05-10 03:17  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This is a 9V power supply which will work even on power failure. It uses a rechargeable battery and regulators. A transformer with 15-0-15 AC volts output is required.

Battery Backup Supply

In the first regulator U1 the output is lifted up by 1.4V and in the second regulator U2 by a resistor divider. In the second regulator the voltage across resistor R3 is 5V, so the current is 5V / 1K = 5mA this adds to the quiescent current of 5mA from the regulators ground terminal and flows into the resistors R1 and R2 in parallel which form 404 ohms, 10mA thru 404 ohms is 4V. So the output will be 5 4 = 9V. Note that the charge and discharge paths of the battery are separated with diodes.


Reprinted Url Of This Article:
http://www.electronics-circuits.com/tech/2004/10/battery-backup-supply/