Position: Index > Bridge Circuit >

precision bridge isolation and measurement amplifier circuit

2016-05-18 20:42  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


precision bridge isolation and measurement amplifier circuit
Bridge isolation and measurement amplifier circuit is widely used for industrial process control, which is composed of ISO102 and INA102 with low noise and low power comsuption. Just as shown in the figure. ISO102 is capacitor coupled buffer and isolation amplifier circuit, having a gain of 1000. It is mainly used for 300Ω bridge signal amplification. The power supply of a bridge is completed by the two parts. One is that the supply side(INA102 12 feet) provides l4mA current through the 680Ω resistor, the other is that the +5 V reference from the ISO102 incentive provides 2.7mA current. The plused 16.7mA current powers the bridge. Changing signal of the bridge can be directly input to the differential input point of INA102. It can achieve isolation amplifier of both bridge signal and output voltage Uo. The measurement circuit is powered by PWS725A or PWS726A and other DC / DC conversion devices. So the implementation of no common ground and no total power supply can be achieved in isolated parts. The circuit can be directly used for accurate measurement of direct pressure, weight and physical strain and so on.