Position: Index >

Car thermostat circuit

2017-01-16 19:07  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This electronic car thermostat circuit described here regulates the air blower system of a car. When the temperature inside the car exceeds a certain preset level T1 tuns on the fan. A temperature dependent resistor NTC (thermistor) is used as a sensor. The resistance of this resistor must be 47kΩ at 25oC.
The car thermostat circuit is calibratedthrough potentiometers P1 and P2 so the air blower will turn on one the threshold temperature is reached. P2 sets the “ON” level and P1 the “OFF” level.

To calibrate the car thermostat circuit:first set P1 at middle position and slowly adjust P2 untl the fan turns on. The temperature value must be the desired threshold level at this moment. Later when the temperature has gone down, adjust P1 until the fan stops.
Sent by Mihai George, Romania. Thanks.

Car thermostat circuit diagram

car thermostat diagram

Reprinted Url Of This Article: