Position: Index >

Portable CD Player Adapter For Car

2017-01-16 09:26  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.
Whenever I'm in the car listening to my favourite CD, it always happens; my batteries go dead. To solve that problem, I built this extremely simple regulator circuit. It steps down the 12V from the lighter socket to 9V which is used by the CD player. Different CD players (I have a Sony Discman) may require different voltages, so just use the correct regulator. All the 78xx series regulators have the same pin out, so the circuit is universal.

Schematic

This is the schematic of the Car CD Player Adapter

 

Parts

Part
Total Qty.
Description
Substitutions
C111000uF 25V Electrolytic Capacitor 
C2110uF 25V Electrolytic Capacitor 
C311uF 15V Elextrolytic Capacitor 
C410.1uF 15V Electrolytic Capacitor 
U117809 Or Other Regulator (See "Notes")See Notes
MISC1Cigarette Lighter Plug, Plug For CD Player (See "Notes"), Heat Sink For U1, Wire, Case. 
 

 

Notes

The voltage your CD player needs will determine which regulator you use. For 9V, use the 7809. For 6V, use the 7806. For the unlikely 5V use the 7805. Remember that whatever regulator you use, you will need to heat sink it. The metal case or metal cover on the case makes a great heat sink.I built the circuit in a small case with the long wire to the cigaratte lighter plug coming out one end, then another, slightly shorter wire going out the other end to the CD player.Triple check your wiring. You would hate to ruin an expensive CD player because you reversed one of the connections or hooked the regulator up backwards.

 

 


Reprinted Url Of This Article:
http://www.aaroncake.net/circuits/cdsupply.asp