Position: Index > Control Circuit >

STM32F103-HB header board for ST CORTEX-M3 controllers

2015-03-02 10:12  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

STM32F103-HB header board for ST CORTEX-M3 controllers

Header board for microcontrollers STM32F103 - the universal board enabling easily and quickly to start to work with ST Cortex-M3 microcontrollers.

The ARM Cortex-M3 processor is the latest generation of ARM processors for embedded systems. It has been developed to provide a low-cost platform that meets the needs of MCU implementation, with a reduced pin count and low-power consumption, while delivering outstanding computational performance and an advanced system response to interrupts. The ARM Cortex-M3 32-bit RISC processor features exceptional code-efficiency, delivering the high-performance expected from an ARM core in the memory size usually associated with 8- and 16-bit devices.
The STM32F103 Performance Line family has an embedded ARM core and is therefore compatible with all ARM tools and software. It combines the high performance ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced I/O capabilities. STM32F103-HB is low cost development board for the new ST Cortex-M3 based microcontrollers STM32F103RBT6 (available version with STM32F103RET6 512kB Flash). This board is perfect solution for USB peripherials development. All microcontroller ports are available on extension connectors.


    MCU: STM32F103RBT6 ARM 32 bit CORTEX M3™ with 128K Bytes Program Flash, 20K Bytes RAM, USB, CAN, x2 I2C, x2 ADC 12 bit, x3 UART, x2 SPI, x3 TIMERS, up to 72Mhz operationavailable version with STM32F103RET6 ARM 32 bit CORTEX M3™ with 512K Bytes Program Flash, 64K Bytes RAM, USB, CAN, x2 I2C, x3 ADC 12 bit, x3 UART, x2 SPI, x4 TIMERS, 2xPWM, up to 72Mhz operationstandard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAGUSB connectoruser buttonRESET buttonstatus LEDpower supply LEDon board voltage regulator 3.3V with up to 800mA currentsingle power supply: takes power from USB port or extension connector pin8 Mhz crystal oscillator32768 Hz crystal and RTC backup battery connectorextension headers for all uC portsHihj quality PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component printDimensions: 61x 34mm (2.4 x 1.3")Distance between the exntension connectors: 25.4 mm (1")