Position: Index > Control Circuit >

Telephone Record Control(2N2222)

2015-02-28 09:23  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article briefly describes the Telephone Record Control (2N2222). This principle is easy to understand, but also very practical. Depth understanding of circuit elements, can be more effective to grasp this principle. Do you know the circuit, for example, can understand and buy these components: 2N2012 , 2N4360, 2N2222 .

This circuit will allow you to connect any tape recorder that has a mic and remote input to a phone line and automatically record both sides of a conversation when ever the phone is in use. You will need to take a couple of voltage readings before connecting the circuit. First determine the polarity of your phone line and connect it to the circuit as shown and then determine the polarity of the remote input and connect it to the circuit. Circuit operation is as follows. When the phone is on hook the voltage across the phone line is about 48volts dc. When the phone is off hook the voltage will drop to below 10volts dc. When the line voltage is at 48volts theFETis off which causes Q2 and Q3 to be off. When the phone is picked up theFETturns on along with Q2 and Q3 which turns your recorder on. The tape recorder must be in the record mode at all times. As you can see the power source for the circuit is the phone line.

Figure:1 Circuit diagram

Figure 1 Circuit diagram

 

 


Reprinted Url Of This Article:
http://www.eeweb.com/blog/extreme_circuits/telephone-record-control