Position: Index > Converter Circuit >

12V From USB Port - 5V to 12V Converter(LT1618)

2016-01-17 19:19  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes a 12V From USB Port - 5V to 12V Converter (LT1618). The principle is very simple, very practical. The circuit components can help you understand better grasp this principle. For example, in this circuit, you can go to find and buy these components: LT1618.

Using this circuit we can convert 5V DC from the computerUSBport to 12V DC and a circuit like this will find a lot of application inUSBpowered systems. The heart of this circuit is IC LT1618 which is a constant current, constant voltage boost converter. The IC has a wide input voltage range of 1.8 to 18V DC and output voltage can be up to 35V DC.

In the circuit resistors R1, R2 sets the output voltage. Pin number 9 is the shutdown pin, less than 0.3V to this pin will shut down the IC. Pin number four is the current sense adjust pin. The current sense voltage can be reduced by applying a DC voltage to this pin. If this adjustment is not needed connect this pin to ground and you can omit components R3, R5 and Q1.

Figure:1

Figure 1 

Notes

C2 and C3 must be rated at least 15V.Less than 0.3V at the shutdown pin will shutdown the IC.Output voltage is governed by the following equation R1 = R2 ( (Vout /1.263V) -1).

 

 

 


Reprinted Url Of This Article:
http://www.eeweb.com/blog/extreme_circuits/12v-from-usb-port-5v-to-12v-converter