Position: Index > Converter Circuit >

5V to isolated 5V at 20mA converter (MAX635)

2016-01-18 17:48  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes the 5V to isolated 5V at 20mA converter (MAX635). The principle is very simple, very practical. The circuit components can help you understand better grasp this principle. For example, in this circuit, you can go to find and buy these components: MAX635.

When we need a constant voltage 5V at the current about 20mA, by there are power supply source voltage about 4V to 6V.
In this circuit, We use the MAX635 IC number is the main equipment, that acts as Preset/Adjustable Output CMOS Inverting Switching Regulators.
At pin A, a negative outputdc-dc convertergenerates a -5V.
First, a negative output voltage dc-dc converter generates a -5V output at pin A.

5V to isolated 5V at 20mA converter by MAX635

Then, the primary of the transformer (T1) must fly back to a diode drop more negative than -5V.
If T1 has a tightly coupled 1:1 turns ratio (270uH), there will be a 5V positive voltage at diode across the secondary ‘s T1.
The 1N5817 rectifies this secondary voltage to generate an isolated 5V output.
The isolated output is not fully regulated since only -5V at point A is controlled by the IC1.

Related link
Isolated DC-DC converters
5 volt dc converter
Feedback Regulated, Isolated 9V Supply By IC 4011
Mini Power Supply 9V to Isolated 9V for LCD Panel Meter
5VDC to 12V and -12V Isolated dual Switching Regulator with LM2587

 


Reprinted Url Of This Article:
http://wiringdiagramcircuit.com/5v-to-isolated-5v-at-20ma-converter-by-max635/