Position: Index > Converter Circuit >

Buck boost converter circuit

2016-04-21 21:15  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.
Buck Boost converter circuit using LTC3440 Description.

A very efficient buck boost converter circuit is shown here. The circuit is based on the LTC3440 buck boost regulator IC from Linear Technology. The LTC3440 requires only one inductor and provides up to 96% efficiency. There is no need of Schottky diode for applications where output voltage is less than 4.3V and the IC can deliver up to 600mA output current.

In the circuit the IC is wired as a buck boost regulator providing 3.3V output from a 2.7 to 4.2V input. R1 is the timing resistor which determines the oscillator frequency and it can be varied between 300 KHz to 2MHz by varying the value of R1. C1 is the input bypass capacitor for reducing noise and C3 is the output filter capacitor. Resistors R4, R4 sets the output voltage and the network consisting of C2 and R2 is meant for frequency compensation.

Buck Boost Converter Circuit diagram. buck converter- bost converter

buck/boost converter using LTC3440

Notes.

Assemble the circuit on a good quality PCB. Input voltage can be between 2.7 to 4.2V. L1 can be a toroid, potcore or shielded bobbin inductor. C1 to C3 are ceramic capacitors.

Following circuits may be also useful to you:

5V buck regulator using LM2678

Switching Regulator using LM1758 A

6 to 12 Voltage converter using TDA2003