Position: Index > Converter Circuit >

Converter 9V to 13.5kV circuit

2016-01-19 06:47  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

The transformer T1 has a ratio 3000:500 Ω of the type used in audio output transistor. T2 is a transformer flash lamp trigger a secondary 6kV.

The schematic diagram come from circuit: Converter 9V to 13.5kV power supply. Go to that page to read the explanation about above power supply related circuit diagram.Converter 9V to 13.5kV
This high voltage source is formed by an inverter, around the transistor, which provides pulses of 150V to the inverter formed by the thyristor and capacitor in series with the transformer 2. This pulse output of 4.5kV to be multiplied ...

Simple Converter to Power UV Lamp
This simple converter to power UV lamp scheme is a simple converter to power the ultraviolet lamp low voltage. The power supply can be applied using the 6? batteries of 1.5V? or a power supply with an output current of ...

Simple Switching Power Supply 15 Watt
This Simple switching power supply for 15 Watt can be used to power any load up to 15 ... 20 watts and has smaller dimensions than a similar, but with the step-down transformer, operating at a frequency of 50 Hz. ...

Car Lamp Charger
Scheme of the Car lamp charger is shown in above. A distinctive feature of the scheme is that the battery will never recharge. This Car lamp charger circuit is built into the "Chinese" lantern, which originally had 4 batteries. Setting ...

40V Regulated Power Supply based TIP42A and LM317
This is a 40V Regulated Power Supply, built using IC LM317 as regulator and TIP42A as electric current amplifier. Component part:? Regulated Power Supply R1 = 3R9 1 or 2W R2 = 22R R3 = 6K8 R4 = 220R R5 ...


Reprinted Url Of This Article:
http://powersupply88.com/converter-9v-to-13-5kv.html/converter-9v-to-13-5kv-circuit