Position: Index > Converter Circuit >

DC12V to DC28V Converter with LM2585

2016-01-17 12:42  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This circuit is boost regulator,
input volt DC12V for output DC28V (28v relay)
The circuit is built around the LM2585,
and uses the energy stored in an inductor to boost the 12v to 28.
The circuit does it’s switching around 100 Khz,
but generates no noise if SMT components are used.

DC12V to DC28V Converter with LM2585


1. A short-circuit on the output will kill U1 and D1. Always use a 1 ohm 5w resistor,
or a 2.5A fast fuse on the 12v input lead.
2. Do not omit the LED (D2); It provides a visual indicator of a properly operating boost condition,
but more importantly, it also provides a minimum load for the output,
preventing an output “spike” which will otherwise
appear when the load is disconnected abruptly.

3. Keep the ratio of r2 and r3 to 22 or less to keep the output voltage
within the ratings of C4 (C4 on my board is rated at 35wvdc).
This ratio plus 1, multiplied times 1.25v, determines the output voltage.

Source: http://www.w6pql.com/12_to_28v.htm

Related Links
DC to DC converter IC
Step up dc converters circuit
Step up voltage converter
DC Converter 12V to 24V 2A by IC 40106 and Mosfet BUZ11
dc converter 12V to 30V – 30V for car with IC SG3525
12V to 16V DC/DC Converter with LM2577
12V to 18V step-up DC converter by IC 555
SG3525 DC Converter 12V to 35V,-35V
12V to -20V converter for audio amplifier

Reprinted Url Of This Article: