Position: Index > Converter Circuit >

Rms-to-dc converter

2016-01-18 19:13  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

The DC output at Pin 1 vanes linearly with the RMS input at Pin 4. 2 CT is tweaked until the svnc signal is in phase with the AC signal. An ac voltmeter may be easily constructed. Simplicity of the circuit and low component count make it particularly attractive. The demodulator output is a full-wave rectified signal from the ac input at Pin 4.
Rms-to-dc converter

The dc component on the rectified signal at Pin 5 varies linearity with the rms input at Pin 4 and thus provides an accurate rms-to-dc conversion at the output of the filter (Pin 1). CT is a variable capacitor that is tweaked until the oscillator signal to the sync input of the demodulator is in phase with the ac signal at Pin 4.

Reprinted Url Of This Article: