Position: Index > Data Circuit >

Data Acquisition System Ii

2016-10-13 12:31  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


In this circuit, an HA-4900 series comparator is used in conjunction with a D/A converter to form a simple, vers
Data Acquisition System Ii

atile, multichannel analog input for a data acquisition system. The processor first sends an address to the D/A, then the processor reads the digital word generated by the comparator outputs, lb perform a simple comparison, the processor sets the D/A to a given reference level, then examines one or more comparator outputs to determine if the inputs are above or below the reference. A window comparison consists of two such cycles with two reference levels set by the D/A. One way to digitize the inputs would be for the processor to increment the D/A in steps. The D/A address, as each comparator switches, is the digitized level of the input. While stairstepping, the D/A is slower than successive approximation; all channels are digitized during one staircase ramp.



Reprinted Url Of This Article:
http://www.next.gr/digital/data-bus-circuits/data-acquisition-system-ii-l14047.html