Position: Index > Data Circuit >

The FAN5631/5632, a 250mA Step-Down Charge Pump Datasheet

2016-10-18 20:20  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

The FAN5631/5632is a regulatedStep-Down Charge Pump DC/DC Converterwhich is using switching techniqueFAN5631_5632 typical application circuit diagramtechnology that produce low output ripple, lower ESR spikes, and improve efficiency over a wide load range. Hence, FAN5631/5632 can produce a fixed regulated output voltage from an input voltage of 2.2V to 5 V. This device commonly used on application such as cell phones, hanheld computers, portable electronic equipment, digital cameras and etc.

It is recommended that you should not exceedFAN5631/5632or design them to their Absolute Maximum Ratings as stated to ensure optimal performance inthe datasheetspecifications. The recommended operating conditions are Vcc (supply voltage range) 2.2 to 5.5V, Iout (Output Current/Vin > 2V) max 250mA, and Ta (operating ambient temperature range) -40 to 85 C which typically 25 C.

On detailed descriptions section withinthe FAN5631/5632 datasheet, there are descriptions about an efficiency optimizer feature that when enabled, it will changes the switch configuration from 2:1 to 1:1 at the lower treshold of Vin or step-down charge pump operation, pulse-skipping PFM and fractional switch operation, the shutdown, UVLO, short circuit, current limit and thermal shutdown.

The circuit diagram above show you about FAN5631/5632 typical application. Follow complete read aboutThe FAN5631/5632, a Step-Down Charge Pump Devicein the FAN5631/5632 datasheet here in pdf filetype (source: fairchildsemi.com)