Position: Index > Filter Circuit >

# 2nd Order Opamp Filters

2017-02-20 18:31

Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

The figures below illustrate using opamps as active 2nd order filters. Three 2nd order filters are shown, low pass, high pass, and bandpass. Each of these filters will attenuate frequencies outside their passband at a rate of 12dB per octave or 1/4 the voltage amplitude for each octave of frequency increase or decrease outside the passband. First order low or high pass cutoff frequency (-3dB point) = 1/(2pi*R*C) 2nd order low or high pass cutoff frequency (-3dB point) = 1/2pi(R1*R2*C1*C2)^.5 Example for 200 Hz cutoff frequency - R1=R2=7.95K, C1=C2=0.1uF

Maybe you like

Similar Circuit Diagram

- Hum Filter (741) Circuit
- Capacitor fourth-order low-pass filter circuit diagram
- Very simple low pass filter(integrator) circuit diagram
- Multifunctional Active Filter Circuit
- ANTIALASING_AND_SYNC_COMPENSATION_FILTER
- Bandwidth adjustable audio filter circuit with the 900Hz cen
- UNITY_GAIN_SECOND_ORDER_HIGH_PASS_FILTER
- _HIGH_Q_NOTCH_FILTER
- Butterworth filter has adjustable group delay
- K9450M--the sound 1st intermediate bandpass filter integrate
- FIVE_POLE_ACTIVE_FILTER
- DIGITALLT_TUNED_LOW_POWER_ACTIVE_FILTER
- The Butterworth 4-stage switch capacitor low-pass filter (TL
- SYNCHRONOUS_FILTER_FOR_ADF
- LOW_PASS_FILTER_PHASE_CORRECTOR
- The Butterworth 4-stage switch capacitor low-pass filter (TL
- DYNAMIC_NOTCH_FILTER
- LOW_PASS_DIGITAL_FILTER
- RAZOR_SHARP_CW_FILTER
- TUNABLE_NOTCH_FILTER_TO_SUPPRESS_HUM
- Easily_tuned_notch_filter
- EMI Mains Filter
- LATTICE_COUPLING_OF_DOUBLE_TUNED_FILTER
- Inductance Filter Circuit
- Ultrasonic_filter