Position: Index > Flash Circuit >
Flashing Light with Triacs
2017-02-01 05:24
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.
This flashing light circuit uses triacs to generate an intermittent light with variable frequency. Additional components are the D1 diode and semi adjustable potentiometer R2. The trigger capacitor C1 is increased from 0.1 µF to 220 µF so that the triacs can be ordered for several successive periods. C1′s loading time is longer, so that the lamp flashes with one pause of several periods.Blinking frequency can be adjusted with P1. Semi-adjustable potentiometer R2 regulates the current gate. This setting affects the lighting duration of the lamp because it also establish the C1′s discharging time. Triac Flashing Light Circuit Diagram
Maybe you like
Similar Circuit Diagram
- LED_FLASHER_USES_UJT
- The FET pipe drive timing flash circuit
- The flashing Heart Circuit
- Flashing light indication light switch circuit
- simulate school bus flashers
- Single-way flashing light string circuit (3)
- FLASH_TRIGGER
- ELECTRONIC_FLASH_TRIGGER
- EEPROM/FLASH Memory Organization in PIC 16F877
- SCR flashing LED circuit diagram
- Y977A/B thunderbolt flash integrated module circuit
- LED flasher circuit diagram
- FLASHING_THIRD_BRAKE_LIGHT
- MULTIFLASH_SWITCH
- The camera flashlight circuit
- FLASH_TUBE_DRIVE
- Electronic flash trigger
- The LED circuit diagram with flashing once
- 6 LED FLASHER
- Low Current Flasher circuit
- Four-way flashing light string circuit ( 8 )
- Automobile Steering Flasher (1)
- 1 Kw flip-flop flasher circuit
- Alternating_flasher_using_an_LM3909_chip
- The flash sequence of the Daewoo fault code of 12