Position: Index > Flash Circuit >

Sound trigger for flash unit

2017-02-01 16:40  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

The circuit is based on operational amplifier IC1 used in the noninverting amplifier mode. Rl and 2 set the gain at about 500.RV1(sensitivity) biases the noninverting input to the negative supply. Ql provides the relatively high trigger current required by the triac. When a signal is received by the microphone, the signals are amplified (by IC1). The triac is triggered and a low resistance appears across its Al and A2 terminals which are connected via the fiash lead to the strobe.The circuit operates almost instantly, giving very little delay between the commencement of the sound and the flashgun being triggered.
 

Sound trigger for flash unit  
 

 

 



Reprinted Url Of This Article:
http://www.next.gr/video/photo-flash/sound-trigger-for-flash-unit-l12242.html