Position: Index > Inverter Circuit >

Pure Sine-Wave Generator

2015-01-01 00:00  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This circuit produces a pure, - 80-dB THD sine wave with a frequency that is equal to the fc of IC3`s filter. A TT
Pure Sine-Wave Generator

L counter, an 8-channel analog multiplexer, and a fourth-order low-pass filter can generate 1- to 25-kHz sine waves with a THD of better than - 80 dB. The circuit cascades the two second-order, continuous-time Sallen-Key filters within IC3 to implement the fourth-order low-pass filter. Two resistive dividers connected from ground to VDD and ground to Vss provide bipolar dc inputs to the multiplexer. lb operate the circuit, you first must choose the filter`s cutoff frequency, fc, by tying IC3`s D0 through D6 inputs to 5 V or ground. The cutoff frequency can be at 128 possible levels between 1 and 25 kHz, depending on those 7 digital input levels. Because this figure ties Z)0 through D6 to ground, fc equals 1 kHz. The 100-kHz potentiometer adjusts the output level anywhere from 1.5 V below Vdd to 1.5 V above Vss-The clock input frequency must be 8 times higher than the filter`s fc. The multiplexer then produces an 8x oversampled staircase approximation of a sine wave. 8 oversampling greatly simplifies the smoothing requirements of the low-pass filter by pushing the first significant harmonic out to 7 the fundamental. All higher-order harmonics are removed by IC3, which includes an uncommitted amplifier for setting the output level.

Reprinted Url Of This Article: