Position: Index > Inverter Circuit >

Pure Sine Wave Generator (74HC163)

2015-01-01 00:00  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This is a circuit that can generate 1kHz to 25kHz sine waves with a THD better than -80dB. This circuit consist of a 4th-order low-pass filter, a TTL counter and 8-channel analog multiplexer. Here is the circuit :

pure sine wave generator circuit schematic diagram

The bipolar dc input of multiplexer is provided by two resistive dividers connected from ground to VDD and ground to VSS. The multiplexer is used to produces the clock’s input frequency. To implement the 4th-order lowpass filter, this cricuit? cascades the two 2nd-order, continuous-time Sallen-Key filters within IC3.

The filter’s cutoff frequency, fC, can be obtained by tying IC3′s D0 through D6 inputs to 5V or ground. The filter’s cut off of this circuit is 1 KHz. The output level is adjusted by the 100k potentiometer between VSS 1.5V and VDD -1.5V. The filter’s fC must be eight times lower than the clock’s input frequency. It is greatly simplifies the smoothing requirements of the low-pass filter by pushing the first significant harmonic out to seven times the fundamental. IC3 is used to remove all higher-order harmonics.

This article describes the Pure Sine Wave Generator (74HC163). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:74HC163.

 


Reprinted Url Of This Article:
http://wiringdiagramcircuit.com/pure-sine-wave-generator/