Position: Index > Lamp Circuit >

Disco Lamp Circuit using CD4069

2016-08-12 00:14  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

here is disco lamp circuit. this circuit using 220 of voltage to operated. One interesting application is to control your disco lighting automatically by the musical sound from high power amplifier, when the music signal is dominating the sound space. The potentiometer shown in the schematic diagram is used to adjust the gain of the pre-amplification. You can use either moving coil microphone or condenser microphone for this circuit. Make sure the electrolytic capacitor is rated for 16 volt or more. You can adjust this potentiometer to get a proper sound level where the relay would be activated.

Disco Lamp Circuit using CD4069 400x247 Disco Lamp Circuit using CD4069

part of list

R1 : 22k 1/4 watt resistor
R2 : 4K7 watt resistor
R3 : 2K2 watt resistor
R4,R8 : 10K watt resistor
R5 : 33K watt resistor
R6 : 56K watt resistor
R7 : 1M watt resistor
Potensio: 50K
C1 : 470uf/35V electrolytic capacitor
C2 : 22n ceramic capacitor
C3 : 100n ceramic capacitor
C4 : 1Uf/50V electrolyticcapacitor
D1 – D5 : 1N4007
D6 : Zener 5.1v
D7 : 1N4148
IC : CD 4069
SCR : FIR 3D
Mic : Mic Condensor








Reprinted Url Of This Article:
http://freecircuitdiagram.net/disco-lamp-circuit-using-cd4069.html