Position: Index > Lamp Circuit >

The Circuit Diagram of 4W Fluorescent Lamp (BD243C)

2016-08-07 05:16  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes The Circuit Diagram of 4W Fluorescent Lamp (BD243C). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:BD243C.

This simple4W fluorescent lamp driver circuit diagramcan be operated from a 12 V power supply. The first portion of the circuit includes a NE555 timer IC wired as an a stable multivibrator. The transistor Q1 amplifies the output pulses to the IC. The transformer steps up the the collector voltage to around 1KV to drive the fluorescent lamp. The R2 need to be set at full resistance before using the circuit. Then turn on the power supply, adjust R2 so that the collector current is 300 mA which is the lamp optimum setting because it would gives a better life for the lamp. Use the heat sink for transistor Q1 , a 3V primary, 230 V secondary, 5W transformer to W1. Power the circuit from a 12V battery or 12V DC power supply. The L1 can be a 6 inch 4W fluorescent lamp.

 

4-w-fluorescent-lamp-diagram

 


Reprinted Url Of This Article:
http://wiringdiagramcircuit.com/the-circuit-diagram-of-4w-fluorescent-lamp/