Position: Index > Led Circuit >

Fairy Flashing LED Lights

2014-12-06 05:06  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This simple and cheap circuit is not just for Christmas! There are just two resistors, a small-signal transistor such as a BC547, one ‘flashing’ LED and a string of ‘normal’ LEDs. The flashing LED works as an oscillator and switches the transistor on and off; and the transistor switches all the other LEDs. An (unregulated) 12 V mains supply can be used for power.

No current-limiting resistor is required in the LED chain, because the forward voltages of the LEDs in the chain add up to the supply voltage. If red LEDs are used, with a voltage drop of 1.65 V, then 12 V will supply seven; alternatively, use six yellow (2.1 V each) or five green (2.7 V). You can of course always mix the colours.

Flashing LEDs circuit diagram

Fairy lights Variation:
Alongside the NPN transistor add a PNP transistor with its emitter connected to 12 V, with another string of LEDs connected down to ground. The two strings will flash alternately.

What is LED?
Reprinted Url Of This Article:
http://electroschematics.com/766/flashing-led-lights/