Position: Index > Led Circuit >

USB LED Lamp circuit.

2014-12-23 16:23  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

USB Lamp Circuit


Here is a simpleUSBpowered lamp that can be used to light your desktop during power failures. The circuit operates from the5 Voltavailable from the USB port.The 5V from the USB port is passed through current limiting resistor R2 and transistor Q1. The base of transistor Q1 is grounded via R1 which provides a constant bias voltage for Q1 together with D2.The diode D1 prevents the reverse flow of current from battery.C1 is used as a noise filter.Two white LED’s are used here for the lamp, you can also use a 2 V torch bulb instead of LED’s. LED D3? indicates connection with USB port.

USB Lamp Circuit Diagram with Parts List.

USB LED Lamp Circuit

USB Lamp Circuit Diagram


    USB port is only able to provide up to 100 mA current.So don’t overload the circuit with more no of LED’s.Before wiring the circuit confirm the positive and ground leads of USB by a multimeter.Switch S1 can be used to turn on the lamp.

    We have more interesting USB Circuits that you may like to see;

    1. USB Sound Card

    2. 12 Volt from USB Port

    Reprinted Url Of This Article: