Position: Index > Monitor Circuit >

Board System Monitoring for Temperature and Voltage Conditio

2015-01-23 18:17  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This article describes the Board System Monitoring for Temperature and Voltage Condition (NE1617A). The content is very simple, very helpful. Components in this article can help you understand better understanding of this article. For example, in this article, you can go to find and buy these components:NE1617A.

This is a circuit of board system monitoring for temperature and voltage condition. It uses the NE1617A. The NE1617A is a 2 channel temperature sensor. It can measure remote and internal sensor. It also supports up to nine devices per bus. The temperature data update is selectable from 125 ms to 16 seconds, if it is used in normal operation. An internal, the temperature reading can be forced by one-shot command.? Here is the circuit :

Board System Monitoring for Temperature and Voltage Condition circuit schematic

The advantages of the NE1617A are progamable, has high accuracy, small, 16-pin QSOP packages and has an operating temperature of 0 to 120 °C. It can be used for applications where thermal monitoring of electrical components and hardware is critical.

The more advanced version of the NE1617A is the NE1619. Besides measures the remote and internal temperature, the NE1619 can be used to monitor nine different voltage. It has programmable voltage? and temperature limits for controlling internal alarms and? supports two devices per bus. It also has an on-chip A/D converter which supports data collection and other functions. The consistent conversion rate that is used by the NE1619 is approximately 500 ms.


Reprinted Url Of This Article:
http://wiringdiagramcircuit.com/board-system-monitoring-for-temperature-and-voltage-condition/