Telephone line monitor
Telephone Recorder
This nifty little circuit lets you record your phone conversations automatically. The device connects to the phone line, your tape recorder's microphone input, and the recorder's remote control jack. It senses the voltage in the phone line and begins recording when the line drops to 5 volts or less.
Circuit diagram
Parts
R1 270K 1/4 W Resistor
R2 1.5K 1/4 W Resistor
R3 68K 1/4 W Resistor
R4 33K 1/4 W Resistor
C1 0.22uF 150 Volt Capacitor
Q1, Q2 2N4954 NPN Transistor
D1 1N645 Diode
MISC Wire, Plugs To Match Jacks On Recorder, Board, Phone Plug
Notes
1. The circuit can be placed anywhere on the phone line, even inside a phone.
2. Some countries or states require you to notify anyone you are talking to that the conversation is being recorded. Most recoders do this with a beep-beep. Also, you may have to get permission from the phone company before you connect anything to their lines.
Reprinted Url Of This Article:
http://www.diy-electronic-projects.com/p96-Telephone-line-monitor
- Fuse Monitor / Alarm
- S/PDIF monitor
- Outstanding Combination of Fan Regulator and Voltage Monitor
- Load Monitor Alarms Above 60W
- Infra-Red Sensor/Monitor(CSC9270LDGP)
- Bidirectional Battery-Current Monitor
- Temperature Measurement (Sensing) and Monitoring (TC9400)
- Output signal and transmitting bus monitor circuit
- How to build Telephone line monitor
- Supply Voltage Monitor with 555 IC
- Flashing battery monitor circuit diagram
- Darkness monitor CIRCUIT (2N5061)
- INA159 Dual-Polarity, Bidirectional Current-Shunt-Monitor Ci
- Solenoid Current Monitor for Ground Tied Solenoid
- 12 volt battery monitor CIRCUIT (2N3904)
- Voltage Monitor electronic circuit diagram
- Security Monitor
- Static Charge Monitor
- The LT6105 Can Monitor the Current of Either positive or ne
- Ignition monitor strobe
- Sound level monitor
- Two Transistors Lead Acid Battery Monitor
- Plant moisture level monitor
- Pulse Rate Monitor
- Electrodeless Water Level Monitor