Position: Index > Motor Circuit >

EDE1204 Bi-Polar Stepper Motor IC Connection via L293 H-Brid

2016-09-04 18:59  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

AnEDE1204 driveris a 5-volt 18 pin integrated circuit or chip that is designed to control a bipolar (4 wire) stepperEDE1204 Bipolar Stepper Motor IC Connection via L293 H Bridge IC Schematicmotor. It has the ability of speed control, direction control and step mode control. You will have a schematic description todrive EDE1204 Bi-Polar Stepper Motor IC Connection via L293 H-Bridge IC.

In the figure,the EDE1204is paired with L293 Dual H-Bridge IC for many applications as it provides a two IC drive circuit. It is very noted that you should connect the two EDE1204 pin ‘Coil A’? as inputs to one H-Bridge and the two EDE1204 pin ‘Coil B’ as the inputs to the other since activate both side of an H-Bridge Circuit may lead to short-circuit current flow.

The L293 Dual H-Bridge ICcan supply up to 1A per coil and you can follow these pinout of the L293 IC: pin1= chip inhibit; pin2= input 1; pin3= output 1; pin4=GND; pin5= GND; pin6=output2, pin7=input2; pin8=Vc; pin9=chip inhibit2; pin10=input3; pin11=output3; pin12=GND; pin13=GND; pin14=output4, pin15=input4; pin16=Vss 5V.

Further information aboutEDE1204 Bi-Polar Stepper Motor IC Connection via L293 H-Bridge IC Schematiccan be found in the EDE1204 datasheet (source: elabinc.com)