Position: Index > Phone Circuit >

Wireless Headphone Circuit Diagram

2016-02-01 20:26  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


Wireless Headphone Working principle is introduced.The transmitter comprises a single amplifying stage driving two series connected IR LEDS. The input source is connected to J1.the device will pass a small DC current through it and also directly bias the  transistor. A suitable device is therefore a high output crystal microphone. These can produce high output voltages up to 1 Volt but this will be reduced by the transistors low input impedance. The receiver is three stages, the first stage being a photo-transistor. Stages two and three form a high gain darling-ton emitter follower, the bias for the whole stage derived through R2 and the photo-transistor itself. C1 and R3 form a filter to reduce interference from fluorescent lighting and other hum sources. The output is via Jack J2. Note also that the output device will pass a small DC current so a medium impedance loudspeaker or headphones are a good choice here.Wireless Headphone Circuit Diagram