Position: Index > Power Supply Circuit >

5 And 12V Ac Powered Switching Supply

2015-03-19 14:47  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.


This supply uses an SGS-Thomson UC3842 IC in an off-line flyback regulator, providing 5 V at 4 A
5 And 12V Ac Powered Switching Supply

and ?± 12 V at 300 mA. This enables a small high-frequency (50 kHz) transformer, to handle large amounts of power that are normally handled by a 60-Hz transformer. Q1 is a 5-A 500-V MOSFET, and the diodes are fast-recovery types. T1 has a 45-turn primary winding of #26 wire. The 12-V windings are each 9 turns of #30 wire, bifilar wound. The 5-V winding is 4 turns of four bifilar #26 wires. The control (feedback) winding is two bifilar, parallel 10-turn, #30 windings. The core is Ferroxcube EC35-3C8 with a 3/s` center leg.



Reprinted Url Of This Article:
http://www.next.gr/power-supplies/ac-dc-dc-dc/5-and-12vac-powered-switching-supply-l14302.html