Position: Index > Power Supply Circuit >

5 volts DC inverter circuit diagram

2014-11-06 17:50  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

This DC DC inverter circuit diagram is based on the MAX724 monolithic, bipolar, pulsewidth modulation (PWM), switch-mode DC-DC regulator optimized for step-down applications. This inverter is a 5 volts DC inverter circuit that require few external components and supports a wide range input voltage from 4.5 volts up to 35 volts .

LM723 0-30V adjustable power supply circuit diagram 15V symmetric power supply circuit 5v switching power supply circuit using LM1575 LM2575 L4970A L4974A power supply coil coresHigh current power supply diagram using L4970A L4974A 5-12V

The maximum output current provided by this inverter is 1 A

If a lower output current is needed, then the current rating of both D1 and L1 may be reduced.

If the minimum input voltage is higher than 4.5V, then greater output current can be supplied.

R1, R2, and C4 provide compensation for low input voltages, but R1 and R2 also figure in the output-voltage calculation because they are effectively connected in parallel with R3.

To obtain larger negative output voltage you need to increase R1, R2, and R3 proportionally while maintaining the following relationships. If VIN does not fall below 2VOUT, then R1, R2, and C4 can be omitted and only R3 and R4 set the output voltage.

R4 = 1.82kW

R3 = |VOUT| - 2.37 (in kW)

R1 = 1.86 (R3)

R2 = 3.65 (R3)

5 volts DC inverter circuit diagram based on the MAX724 regulator IC