Position: Index > Power Supply Circuit >

Fast charge Controller with MAX712 / MAX713

2015-03-16 05:16  
Declaration:We aim to transmit more information by carrying articles . We will delete it soon, if we are involved in the problems of article content ,copyright or other problems.

The MAX712 and MAX713 are nickel cadmium (Ni-Cd) battery fast charge controllers which will fast charge batteries from a DC source at least 1V higher than the maximum battery voltage. 1 to 16 series cells can be charged at rates up to 4C. A voltage-slope detecting analogue-to-digital converter, timer, and temperature window comparator determine charge completion. The MAX712 or 713 are powered by the DC source via an on-clip +5V shunt regulator, and draw a maximum of 5uA from the battery when not charging. A low-side current-sense resistor allows the battery charge current to be regulated while still supplying the power to the battery's load.
Fast charge Controller with MAX712 / MAX713 - img1
The MAX712 terminates fast charge by detecting zero voltage slope, while the MAX713 uses a negative voltage-slope detection scheme. Both devices are identically packaged as 16-pin DIL and share the same pin numbering and basic functions. An external power

Datasheet file1: Click here to download MAX712-MAX713.pdf datasheet.

Datasheet file2: Click here to download 2N6109.pdf datasheet.

Datasheet file3: Click here to download 1N4001.pdf datasheet.